Natural PEEK Precision Shaped Comb Part
- Material: Natural PEEK
- Size: 59X17X84 mm
- Process: CNC Machining
- Surface treatment: None
What This Part Looks Like
This is a shaped comb part. Its body carries several groups of fine, parallel comb slots and raised ribs, with mounting holes at all four corners. It is milled in one piece, keeps the natural color of PEEK, and gets no extra surface treatment.
PEEK is electrically insulating and heat resistant, and it has excellent self-lubricating behavior, which is why parts like this are popular in equipment that demands cleanliness and high temperature performance.
Machining This Part Is a Battle With Heat and Softness
Heat is the first problem. PEEK is a high-performance engineering plastic that softens and springs back when it gets warm. It also conducts heat poorly, so all the cutting heat piles up around the tool tip. Once a spot heats up, the tooth surface can melt and string out, damaging the profile. The material is also prone to sticking to the tool and forming burrs.
The fine comb teeth are thin and narrow. The slots are narrow, the ribs are thin, and many slots sit close together. Cutting stress can push the teeth sideways, so slot width and tooth pitch are hard to keep stable, and the thin teeth can chip at the edges.
Clamp too hard and it deforms. The comb structure has little rigidity, so slightly too much clamping pressure squeezes it out of shape, and when the pressure is released it springs back and the accuracy is lost.

How We Respond
- Keep heat down: Sharp diamond-coated end mills or high-polish carbide tools, cutting dry with a shallow depth of cut, high spindle speed, and light, quick feed, so very little extra heat is generated.
- Plan the toolpath: Slots are milled in layers and machined symmetrically so stress releases evenly; stock is left after roughing, and the part is left to rest so stress settles before finishing.
- Hold it differently: Vacuum holding plus auxiliary supports, so clamps never press directly on the comb area.
- Control temperature and inspect everything: A controlled machining environment, natural cooling after cutting to release internal stress, and a check of tooth pitch, slot width, and flatness on every part.
Where It’s Used
PEEK withstands high temperature, insulates electricity, resists chemicals, and has low friction. This comb part is commonly used in semiconductor equipment, medical devices, automated inspection fixtures, and precision jigs, as a comb component for isolating, locating, guiding, splitting, or carrying material. It suits hot, clean, oil-free operating conditions.



